Floor Mount Detention Bench with Backrest
The KryptoMax® stainless steel floor mount detention bench with backrest is made in the USA. Custom sizes are always available, contact us for a fast quote for your requirements.
Product Features:
- Fully Welded Stainless Steel Construction
- Heavy Schedule 40 Stainless Steel Pipe Pedestals
- Full-Length Stainless Steel Back Support
- ½” Diameter Mounting Holes for Secure Floor Mounting
- Available with or without Restraint Rings
- Fully Customizable
- Lifetime Workmanship Warranty
- Made in the USA
STAINLESS STEEL FLOOR-MOUNT DETENTION BENCH WITH BACKREST
G2’s KryptoMax® floor mount detention bench with backrest (shown with handcuff rings) is built for a lifetime of use using heavy duty materials and a proven, rugged design for superior strength and durability.
This intensive-use bench model features a strong back support that is the same length as the bench. This backrest is fully welded to the reinforced-underside of each seating location (at the top of each floor mount pedestal), as well as to reinforcement plates on the backrest.
The clean design and solid construction of our stainless steel floor mounted detention benches make them suitable for a variety of intensive-use applications and detention installations where safety and security are of highest concern. This stainless steel bench with back support is also available without restraint rings for use in commercial, industrial, transportation, and other facilities that require rugged, comfortable bench seating that will withstand heavy use.
The bench seat and back support panel surfaces are 12 gauge stainless steel. This bench is easy to clean, disinfect, and maintain. In addition, our fully welded stainless steel design resists tampering and vandalism.
The heavy gauge stainless steel construction is intended for intensive-use in high security areas such as detention centers, holding areas, jails, prisons, and other demanding environments.
OPTIONS:
RESTRAINT RINGS: This floor mounted detention bench is available with, or without, restraint rings for handcuffs or similar restraints.
RESTRAINT BAR: A heavy duty restraint bar (handcuff bar) welded to the front of the wall mounted bench is also available. Click here for details on our floor mount jail bench with integrated handcuff bar.
MADE IN THE USA:
KryptoMax® detention benches are available in many different styles, with various mounting options.
This KryptoMax® detention bench is available in various lengths to meet your specific space requirements or for seating 1, 2, 3 or more persons. For instance, the backrest can optionally be added to our 24-inch 1 person detention bench (Part Number with Backrest: KM-FDB-24in-BRC) and our 48-inch 2 person detention bench (Part Number with Backrest: KM-FDB-48in-BRC).
Because it is manufactured in our USA facility, custom dimensions are always available.
We also offer wall-mounted detention benches such our stainless steel, fold-up, wall-mounted bench and many types of floor-mounted detention benches such as our standard stainless steel jail bench, stainless steel corrections bench with restraint bar and the heavy duty KryptoMax® stainless steel prison bench bench with restraint rings welded to the bench frame.
STAINLESS STEEL BENCH WITH BACKREST CONSTRUCTION:
This floor mount detention bench features a fully-welded, heavy duty, 12 gauge stainless steel construction with a standard #4 polished finish.
There is a one half inch (1½”) flange around each the perimeter of the top bench seat and the backstop.
A 12 gauge stainless steel reinforcement plate is welded to the underside of the seat top. The stainless steel bench backrest is attached with three fully-welded quarter-inch-thick (.25″) stainless steel flat bar braces, each welded to reinforcement plates under the bench and the back support.
The 12 gauge stainless steel back support is 17.75″ high and is the same 72″ length as the bench. Overall bench height with backrest is 35.75″.
This back rest is slightly angled away from perpendicular for comfort and accommodates larger body types. Due to the angled backrest, we recommend a minimum floor clearance space of 16″ from a wall for installation.
This popular design typically includes one-and-a-half-inch diameter stainless steel handcuff rings welded at three points, one at each floor pedestal. It is available without the restraint rings for standard bench seating in commercial, industrial, or any other facility requiring heavy-duty, long-lasting seating.
This 72-inch bench includes three (3) two-inch (2″) diameter schedule 40 stainless steel pedestals that are welded to stainless steel reinforced plates on the underside of the bench top. Our other bench versions may have 1 or 2 pedestals (such as for the 24″ or 48″ benches).
The three (3) stainless steel floor plates are welded to the bottom of each pedestal for the 72-inch bench (shorter benches include 1 or 2 pedestals typically).
The floor plates are seven and a quarter inch by seven and a quarter inch (7¼” x 7¼”) square and one quarter inch (¼”) thick.
The four (4) mounting holes per plate are each one-half inch(½”) in diameter. Therefore, the use of larger diameter hardware results in secure floor mounting particularly when installed with tamper resistant hardware.
We recommend four (4) half-inch (½”) by three and quarter inch (3¼”) long tamper resistant expansion bolts minimum (Part Number: GAT-BHA-1/2 x 3 1/4-Z-SS) for each floor plate installation on concrete, stone or other solid surfaces, along with a tamper-resistant-compatible driver for power drills (Part Number: GAT-KM-T55).
All corners and edges are are ground smooth and rounded for safety.
Therefore, the fully welded stainless steel bench provides a secure, strong, single piece design specifically for intensive use.
Alternatively, this bench is available with mild steel construction instead of stainless steel. Powder coated mild steel is not as resilient as stainless, but can offer some initial cost savings to meet budget requirements.
Made in the USA, our stainless steel detention benches set the standard for intensive-use applications. We stand behind the quality of these benches with an included lifetime workmanship warranty.
INSTALLATION RECOMMENDATIONS:
Due to the weight and security considerations for this stainless steel bench with backrest, mounting to concrete, stone, or other similar solid surfaces with tamper resistant concrete bolts & anchors is recommended for secure installation. Please contact us to discuss options, recommendations, or solutions for mounting to surfaces other than concrete, stone, or other similar.
Tamper-resistant bolts and concrete anchors are also available for purchase. They can be provided with the bench for a complete detention seating solution, for example:
- 3.25″ Long KryptoMax® Button Head Tamper-Resistant Concrete Bolt & Anchor with Stainless Steel Post & Steel Zinc Plated Anchor Body Four (4) Pack (Part Number: GAT-BHA-1/2X3.1/4-Z-4-PACK); One (1) Pack of Four (4) per Floor Plate (e.g.: Part Number KM-FDB-72in includes three (3) floor mount plates, therefore you require thee (3) packs for a total of 12 concrete bolt & anchor sets)
– 3.25″ inch Long (1/2″ x 3 -1/4″ long (.5″ x 3.25″ long))
– Part GAT-BHA-1/2X3.1/4-Z-4-PACK includes K55 socket security bit for installing concrete bolts with a power drill
- 3.75″ Long KryptoMax® Button Head Tamper-Resistant Concrete Bolt & Anchor with Stainless Steel Post & Steel Zinc Plated Anchor Body Four (4) Pack (Part Number: GAT-BHA-1/4X3.3/4-Z-4-PACK); One (1) Pack of Four (4) per Floor Plate (e.g.: Part Number KM-FDB-72in includes three (3) floor mount plates, therefore you require thee (3) packs for a total of 12 concrete bolt & anchor sets)
– 3.75″ inch Long (1/2″ x 3-3/4″ long (.5″ x 3.75″ long))
– Part GAT-BHA-1/4X3.3/4-Z-4-PACK includes K55 socket security bit for installing concrete bolts with a power drill
- 4″ Long KryptoMax® Button Head Tamper-Resistant Concrete Bolt & Anchor with Stainless Steel Post & Steel Zinc Plated Anchor Body Four (4) Pack (Part Number: GAT-BHA-1/2X4-Z-4-PACK); One (1) Pack of Four (4) per Floor Plate (e.g.: Part Number KM-FDB-72in includes three (3) floor mount plates, therefore you require thee (3) packs for a total of 12 concrete bolt & anchor sets)
– 4″ inch Long (1/2″ x 4″ long (.5″ x 4″ long))
– Part GAT-BHA-1/2X4-Z-4-PACK includes K55 socket security bit for installing concrete bolts with a power drill
- KryptoMax® Button Head K55 socket security bit for installation of 1/2″ (.5″) tamper resistant hardware you provide for power drills (Part Number: GAT-KM-T55)
G2 offers a full line of intensive use furniture for a variety of border control, commercial, detention, government, industrial, and security applications.
Floor Mount Detention Bench with Backrest
Literature
Click Image to Open or Download PDF Format 
Catalog
Click Image to Open or Download PDF Format
